Re: LAT protocol translation

From: John Galt Kupec (kupec@xxxxxxxx)
Date: Thu Jul 08 1999 - 01:55:07 GMT-3

• Next message: Ben Rife: "DLSW+"
• Previous message: John Galt Kupec: "Re: LAT protocol translation (solved !!)"
• Maybe in reply to: Chuah Eng Wee: "LAT protocol translation"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I would try adding "lat service COOL5 enabled" on R4.

Other things you can add (but not necessary) are:

lat service COOL5 password <password>
lat service COOL5 ident show protocols on R4

Chuah Eng Wee wrote:
>
> Hi...
>
> I am very new to LAT. Tried out the simple scenario below but couldn't get
> it to work. Did I miss out anything ??
>
> [R2]--[R5]--[R4]
>
> R2 is running strictly TCP/IP.
> R4 is running strictly LAT and is advertising a LAT service called COOL5.
>
> R2
> ------
> int S1
> ip address 172.16.25.1 255.255.255.0
>
> R5
> ----
> translate tcp 172.16.25.3 lat COOL5
>
> int s0
> lat enabled
> int s1
> ip address 172.16.25.2 255.255.255.0
>
> R4
> ----
> lat service COOL5 autocommand sh protocols
> int S0
> lat enabled

• Next message: Ben Rife: "DLSW+"
• Previous message: John Galt Kupec: "Re: LAT protocol translation (solved !!)"
• Maybe in reply to: Chuah Eng Wee: "LAT protocol translation"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:41 GMT-3