From: Blankenship Mr Gary C (BlankenshipGC@xxxxxxxxxxxxxxx)
Date: Sat Jun 26 1999 - 17:58:54 GMT-3
Rudy:
I forgot to put the "isdn answer1 :0001" and "isdn answer2 :0001" commands
on router 1.
Gary
> -----Original Message-----
> From: Blankenship Mr Gary C [mailto:BlankenshipGC@nocfwd.usmc.mil]
> Sent: Sunday, June 27, 1999 5:47 AM
> To: Rudy Phen@STARtrac@DASG-KBT
> Cc: 'ccielab@groupstudy.com'
> Subject: RE: ccie lab exam..
>
>
> Rudy:
>
> In this case, since you are calling two devices that are
> still in the same
> building... I would make the determinationw which device
> could initiate a
> call and which one won't :-(. That may solve your problem so
> that the other
> device doesn't intiate the other channel to respond. Configurations
> example:
>
> Router1:
>
> Interface BRI0
> ip addrress 172.16.1.1 255.255.255.0
> encapsulation ppp
> dialer map ip 172.16.1.2 123456:0002
> dialer-group 1
>
> dialer list 1 protocol ip permit
>
> Router2:
>
> Interface BRI0
> ip address 172.16.1.2 255.255.255.0
> encapsulation ppp
> isdn answer1 :0002
> isdn answer2 :0002
> dialer-group 1
>
> dialer list 1 protocol permit ip
>
> Let me know if this works as well. I don't get much time to
> play with ISDN
> so having you perform ISDN configurations by proxy is pretty fun!
>
> Gary
>
> > -----Original Message-----
> > From: Rudy Phen@STARtrac@DASG-KBT
> > [mailto:Rudy.Phen@datacraft-asia.com]
> > Sent: Saturday, June 26, 1999 9:30 PM
> > To: 'Blankenship Mr Gary C'
> > Cc: 'ccielab@groupstudy.com'
> > Subject: RE: ccie lab exam..
> >
> >
> > Hi Gary,
> >
> > Thanks alot ! it's work.
> > but when I use "dialer map ip" command instead of "dialer
> > string", it didn't
> > work. Below is my configure, Pls advice what's wrong with this
> > configuration...
> >
> > (isdn line # is 7444142),
> >
> >
> > router bj
> > ---------
> > isdn switch-type basic-net3
> > dialer-list 1 protocol ip permit
> > interface BRI0
> > ip address 172.17.1.10 255.255.255.248
> > encapsulation ppp
> > dialer idle-time 300
> > dialer map ip 172.17.1.9 7444142:0001
> > dialer-group 1
> > isdn answer1 :0002
> > isdn answer2 :0002
> >
> >
> > router nz
> > ---------
> > isdn switch-type basic-net3
> > dialer-list 1 protocol ip permit
> > interface BRI0
> > ip address 172.17.1.9 255.255.255.248
> > encapsulation ppp
> > isdn answer1 :0001
> > isdn answer2 :0001
> > dialer idle-time 300
> > dialer map ip 172.17.1.10 7444142:0002
> > dialer-group 1
> >
> > if I ping from router bj to 172.17.1.9 (nz router) the router
> > will generate
> > the call using the first B-channel and router nz will
> > response using second
> > B-channel (is it the correct operation?) but the problem is
> > the ping packet
> > it-self do not get reply. When I debug Ip Packet, it show
> > "encapsulation
> > Failed". do you know what's going on ?
> >
> >
> > Best Regards,
> > Rudy Phen
> > STARtrac - Datacraft Asia Ltd
> > Phone : (65) 8436101
> > WWW.Datacraft-Asia.Com <http://www.Datacraft-Asia.Com>
> > Connecting People to Information
> >
> >
> > > -----Original Message-----
> > > From: Blankenship Mr Gary C [mailto:BlankenshipGC@nocfwd.usmc.mil]
> > > Sent: Saturday, June 26, 1999 5:03 PM
> > > To: Rudy Phen@STARtrac@DASG-KBT
> > > Subject: RE: ccie lab exam..
> > >
> > >
> > > Rudy:
> > >
> > > Try this:
> > >
> > > R1:
> > >
> > > Interface BRI0
> > > ip address 172.16.1.1 255.255.255.0
> > > isdn answer1 :0001
> > > dialer string 1234567:0002
> > > dialer-group 1
> > >
> > > dialer-list 1 protocol ip permit
> > >
> > > R2:
> > >
> > > Interface BRI0
> > > ip address 172.16.1.2 255.255.255.0
> > > isdn answer1 :0002
> > > dialer string 1234567:0001
> > > dialer-group 1
> > >
> > > dialer-list 1 protocol ip permit
> > >
> > > Let me know if this works!
> > >
> > > Gary
> > > > -----Original Message-----
> > > > From: Rudy Phen@STARtrac@DASG-KBT
> > > > [mailto:Rudy.Phen@Datacraft-Asia.com]
> > > > Sent: Saturday, June 26, 1999 9:01 AM
> > > > To: 'Blankenship Mr Gary C'
> > > > Subject: RE: ccie lab exam..
> > > >
> > > >
> > > > Gary,
> > > >
> > > > My schedule on 5th and 6th July.. do you get any info..?
> > > > Good luck...!
> > > >
> > > > do you know how to configure isdn where 2 bri interface share
> > > > one S/T Bus
> > > > using subaddress and isdn answer command.
> > > > but I don't have any sample config.. and I tried but it
> > > > didn't work.. Need
> > > > advice !
> > > >
> > > > Best Regards,
> > > > Rudy Phen
> > > > STARtrac - Datacraft Asia Ltd
> > > > Phone : (65) 8436101
> > > > WWW.Datacraft-Asia.Com <http://www.Datacraft-Asia.Com>
> > > > Connecting People to Information
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Blankenship Mr Gary C
> [mailto:BlankenshipGC@nocfwd.usmc.mil]
> > > > Sent: Saturday, June 26, 1999 3:51 PM
> > > > To: Rudy Phen@STARtrac@DASG-KBT
> > > > Subject: RE: ccie lab exam..
> > > >
> > > >
> > > > Rudy:
> > > >
> > > > I've got my lab in Sydney on July 7th and 8th. Are these the
> > > > same days that
> > > > you have yours?
> > > >
> > > > Gary
> > > >
> > > > > -----Original Message-----
> > > > > From: Rudy Phen@STARtrac@DASG-KBT
> > > > > [mailto:Rudy.Phen@datacraft-asia.com]
> > > > > Sent: Saturday, June 26, 1999 1:59 AM
> > > > > To: 'ccielab@groupstudy.com'
> > > > > Subject: ccie lab exam..
> > > > >
> > > > >
> > > > > Hi Groups,
> > > > >
> > > > > 9 days to go my lab on sydney.. does anybody will go
> to there ?
> > > > > I got info that cisco change the exam format. The previous
> > > > > format is TCP/IP
> > > > > configuration on first day and a-half second day is
> > > desktop protocol
> > > > > configuration and the rest is troubleshooting. But I heard
> > > > > that cisco change
> > > > > the format so don't supprise if they ask you to configure
> > > > > DLSW+ on first day
> > > > > and also tunning instead of configuration.
> > > > > And other thing is it could be using IOS version 12.0 on some
> > > > > router and ask
> > > > > you to configure some version 12.0 features, or it could be
> > > > > configuring ATM
> > > > > croud instead of FRAME-RELAY croud as before ? How do you
> > > > > feel with this
> > > > > information... any suggestion ? is it possible ?
> > > > >
> > > > > well does anybody can give me an example on how to configure
> > > > > DDR without
> > > > > configure static routing and I believe that you are not allow
> > > > > to configure
> > > > > static routing at all..
> > > > > Thanks in advance !
> > > > > Best Regards,
> > > > > Rudy Phen
> > > > > STARtrac - Datacraft Asia Ltd
> > > > > Phone : (65) 8436101
> > > > > WWW.Datacraft-Asia.Com <http://www.datacraft-asia.com/>
> > > > > Connecting People to Information
> > > > >
> > > > >
> > > >
> > >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:39 GMT-3