From: Hutchinson, Ian (Ian.Hutchinson@xxxxxxxx)
Date: Thu Jun 24 1999 - 03:46:08 GMT-3
Brian,
I think you'll need to use the dreaded as-path access-lists etc.
regards Ian.
-----Original Message-----
From: Brian Van Benschoten [mailto:vader@inxpress.net]
Sent: Thursday, June 24, 1999 1:47
To: Botten Russell; ccielab@groupstudy.com
Subject: Re: BGP policy routing
I've been reading that book quite a bit....
how do i accomplish the task i set out. to tag a single route (not all
routes from a AS or neighbor) with a higher preference.
Thanks
----- Original Message -----
From: Botten Russell <russell.botten@siemens.com.au>
To: 'Brian Van Benschoten' <vader@inxpress.net>; <ccielab@groupstudy.com>
Sent: Wednesday, June 23, 1999 10:35 PM
Subject: RE: BGP policy routing
> G'day Brian,
>
> Route maps associated with neighbour statements have no effect on incoming
> updates when matching based on IP addresses. See the BGP tutorial by
Bassam
> Halabi.
>
> Cheers,
> Russell.
>
> -----Original Message-----
> From: Brian Van Benschoten [mailto:vader@inxpress.net]
> Sent: Thursday, 24 June 1999 13:25
> To: ccielab@groupstudy.com
> Subject: BGP policy routing
>
>
> I'm getting the following error when applying a route map. I have a dual
> homed AS and want to set local preference for a single route coming in one
> of the ISP pipes.
>
> 2513(config-router)#neighbor 150.100.1.0 route-map 201-local in
> % "201-local" used as BGP inbound route-map, network match not supported
>
>
> router bgp 5
> no synchronization
> network 170.100.51.0 mask 255.255.255.0
> redistribute igrp 100
> neighbor 150.100.1.0 remote-as 254
> neighbor 150.100.1.0 route-map 201-local in <== here it is applied
> neighbor 170.100.2.3 remote-as 5
> neighbor 170.100.2.3 next-hop-self
> neighbor 170.100.200.2 remote-as 666
> no auto-summary
>
>
>
> route-map 201-local permit 10
> match ip address 10
> set local-preference 300
> !
> route-map 201-local permit 20
> match ip address 11
>
> access-list 10 permit 201.201.201.0 0.0.0.255 <== the route in question i
> want to apply local preference
> access-list 11 permit any
>
>
> CAUTION - This message may contain privileged and confidential information
> intended only for the use of the addressee named above. If you are not
the
> intended recipient of this message you are hereby notified that any use,
> distribution or reproduction of this message is prohibited. If you have
> received this message in error please notify Siemens Ltd., ACN 004 347
880,
> or Siemens (NZ) Limited immediately.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:39 GMT-3