From: Jinho Hong (sthong@xxxxxxxxxxxx)
Date: Sat Jun 05 1999 - 13:01:35 GMT-3
Hi, Rudy
IPX NLSP Configuration.
1. Enable the IXP NLSP routing process
2. Defining an address summarization range(optional)
3. Defining an internal IPX network number for each other router (Must be
unique throughout your network)
4. Enabling on desired interface
Sample Configuration
!
ipx routing 0023.b343.c244
ipx internal-network 11111
!
interface Ethernet0
no ip address
ixp network BBBB
!
ipx router nlsp
area-address 0 0
!
Best Regards,
Jinho Hong
===============================================
Routing / Switching World Support Engineer.
ATM / FR Support Engineer.
===============================================
-----Original Message-----
·ol : Rudy Phen <rudy.phen@datacraft-asia.com>
¶æ : ccielab@groupstudy.com <ccielab@groupstudy.com>
ú : 1999N65ú 18:21
¼ : NLSP over NBMA
>Hi All.
>
>Need some advice on how to configure nlsp over nbma such as frame relay.
>I have tried to enable nlsp on frame relay interface but I got this message
" %IPX NLSP not allowed on non-LAN multipoint interfaces ". Is it mean that
nlsp can not relay on nbma ?
>
>Cheers,
>Rudy
>STARtrac @ Datacraft Asia Ltd.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:38 GMT-3