From: George Spahl (georges@xxxxxxxxx)
Date: Thu Jun 03 1999 - 19:27:12 GMT-3
Derek,
Just a guess, but if I remember correctly you have to load ROUTE.NLM on
your Netware server (and ROUTE.COM on the client) in order to enable source
route bridging. On the NT side there should be a setting on your TR NIC
for source route bridging. Also you could look at the SAP table on the
client side router to see if it is seeing the NW server on the other side
or not. As usual, sticking a protocol analyzer of some sort on either side
would really show you what is happening. Hope that helps.
George
At 04:04 PM 6/3/99 +0100, Derek Fage wrote:
>Hi there,
>
>I've setup a lab using RSRB with direct encapsulation over a serial line,
>and it looks as if it is working.
>
>I have an IPX NT w/s on one ring and a Netware Server on the other ring, but
>they do not seem to be able to see each other, and I'm not sure what I need
>to do to prove it is working.
>
>Any ideas ?
>
>Derek (who hasn't done much T/R work as you might guess...)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:38 GMT-3