From: Ekis, Joel (Joel.Ekis@xxxxxxxxxxxxxxxxx)
Date: Thu Jun 03 1999 - 08:59:38 GMT-3
You will need 'frame-relay map ipx ... broadcast' statements on every spoke.
Otherwise you will not have IPX connectivity between the spokes. Also, make
sure you turn off the IPX RIP or you will be dumping extra broadcast traffic
on the F/R circuits needlessly.
Joel Ekis, CCNA, CCDA
Xerox Connect
Sr. Enterprise Consultant/Enterprise Network Services
Phone: 913-696-0888, x234
Pager: 800-697-0359
joel.ekis@connect.xerox.com <mailto:joel.ekis@connect.xerox.com>
-----Original Message-----
From: rudy.phen@datacraft-asia.com
[SMTP:rudy.phen@datacraft-asia.com]
Sent: Thursday, June 03, 1999 6:28 AM
To: ccielab@groupstudy.com
Subject: IPX over frame relay
Next month is a big day... hopefully new CCIE coming...
I am currently testing on my lab for ipx over frame relay
configuration.
I did not using subinterfaces.. but i using IPX Eigrp on the hub dan
spoke router and I turn off the split horizon.
the result is I got all the ipx route.. (perfect..)
but the problem is I can not ping from one spoke router to another
spoke router.. even ping to the frame relay interface on that spoke router
(that connected to hub router)..
I have check all the config.. it's look correctly configure..
Pls consult..... thanks in adv..
Cheers
Rudy Phen
Startrac - Datacraft Asia Ltd.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:38 GMT-3